ASSEMBLY OF A COMPUTER EQUIPMENT

ASSEMBLY OF A COMPUTER EQUIPMENT

It seeks to highlight as you can and / or what is the most correct way to install a computer equipment

1. Clean the work area where you plan to install this esquipo.
2. Desatapar cabinet.
3. Locate the correct position where it must find the motherboard.
4. Placing poles aligned motherboard each screw hole where the card is placed.
5. Attach the motherboard to the cabinet and ensure it is fully subject to this.
6. Place the processor into the socket making sure it is in the correct position.
7. Place silicone grease on top of the processor. Only necessary to generate a thin layer between the processor and heatsink portion.
8. Place the heat sink on the processor, making sure it is in the correct position and connect it to the Model Board CPU FAN.
9. Installing optical drives and hard drives in slots 5 ¼ and 3 ½ accordingly.
10. Wire the front panel HDD LED, power LED, power SWITCH, Sw reset to the motherboard in the panel 1 or front panel, making sure that the position is correct. Quietly and / or carefully.
11. Connect the front audio and USB to the motherboard.
12. Insert the RAM modules into their slots without touching the connection pins.
13. IDE cable connecting the wings units, which must be verified as master or slave.
14. Conetar SATA drives to the motherboard correctly.
15. Connect the ATX connector to the motherboard with care and on peace.
16. Connect the device to the mains power source as appropriate to each.
17. Check the BIOS jumper is in the normal position (1 and 2).
18. Cover the cabinet and verify that each screw this justado correctly.
19. Connect to the power supply with care.
20. ON.
21. Verify that the installed features on the computer are detected by the BIOS.